Journal: PLoS ONE

Article Title: Low-cost three-dimensional printed phantom for neuraxial anesthesia training: Development and comparison to a commercial model

doi: 10.1371/journal.pone.0191664

Figure Lengend Snippet: (A) 3D printed neuraxial phantom with inset showing enlarged view of one interspace. (B) Modeling the ligamentum flavum with silicone paste with inset showing enlarged view of a single level. (C) Total submersion of spine with echogenic gelatin solution (9.0% w/v).

Article Snippet: For this study we used the normal model. We invited twenty-two staff anesthesiologists from one of our hospitals to use and evaluate the 3D printed neuraxial phantom and the Simulab Procedural Trainer.

Techniques:

Journal: PLoS ONE

Article Title: Low-cost three-dimensional printed phantom for neuraxial anesthesia training: Development and comparison to a commercial model

doi: 10.1371/journal.pone.0191664

Figure Lengend Snippet: Expert ratings of the 3D-printed (3DP) and Simulab phantoms. Ratings where on a 1 to 5 scale with 1 = Poor, 2 = Fair, 3 = Average, 4 = Good and 5 = Excellent fidelity to clinical reality.

Article Snippet: For this study we used the normal model. We invited twenty-two staff anesthesiologists from one of our hospitals to use and evaluate the 3D printed neuraxial phantom and the Simulab Procedural Trainer.

Techniques: Imaging

Journal: PLoS ONE

Article Title: Low-cost three-dimensional printed phantom for neuraxial anesthesia training: Development and comparison to a commercial model

doi: 10.1371/journal.pone.0191664

Figure Lengend Snippet: Rating for the 3D Phantom from each expert is plotted against the expert’s rating of the Simulab Phantom. Size of bubble and number indicate the number of experts. Bubbles above the diagonal line represent experts rating the 3D Phantom higher than the Simulab Phantom.

Article Snippet: For this study we used the normal model. We invited twenty-two staff anesthesiologists from one of our hospitals to use and evaluate the 3D printed neuraxial phantom and the Simulab Procedural Trainer.

Techniques:

Journal: PLoS ONE

Article Title: Low-cost three-dimensional printed phantom for neuraxial anesthesia training: Development and comparison to a commercial model

doi: 10.1371/journal.pone.0191664

Figure Lengend Snippet: Rating for the 3D Phantom from each expert is plotted against the expert’s rating of the Simulab Phantom. Size of bubble and number indicate the number of experts. Bubbles above the diagonal line represent experts rating the 3D Phantom higher than the Simulab Phantom.

Article Snippet: For this study we used the normal model. We invited twenty-two staff anesthesiologists from one of our hospitals to use and evaluate the 3D printed neuraxial phantom and the Simulab Procedural Trainer.

Techniques:

Journal: PLoS ONE

Article Title: Low-cost three-dimensional printed phantom for neuraxial anesthesia training: Development and comparison to a commercial model

doi: 10.1371/journal.pone.0191664

Figure Lengend Snippet: Ultrasound views were taken with a linear ultrasound probe. Images from the Simulab phantom are shown in the left column, those from the 3D printed phantom in the right. Images collected were: (A1, A2) Paramedian sagittal view, (B1, B2) Transverse view at inter-space and (D1, D2) Transverse view at spinous process.

Article Snippet: For this study we used the normal model. We invited twenty-two staff anesthesiologists from one of our hospitals to use and evaluate the 3D printed neuraxial phantom and the Simulab Procedural Trainer.

Techniques:

Journal: PLoS ONE

Article Title: Low-cost three-dimensional printed phantom for neuraxial anesthesia training: Development and comparison to a commercial model

doi: 10.1371/journal.pone.0191664

Figure Lengend Snippet: Rating for the 3D Phantom from each expert is plotted against the expert’s rating of the Simulab Phantom. Size of bubble and number indicate the number of experts. Bubbles above the diagonal line represent experts rating the 3D Phantom higher than the Simulab Phantom.

Article Snippet: For this study we used the normal model. We invited twenty-two staff anesthesiologists from one of our hospitals to use and evaluate the 3D printed neuraxial phantom and the Simulab Procedural Trainer.

Techniques:

Journal: Journal of Biomedical Optics

Article Title: Photometric stereo endoscopy

doi: 10.1117/1.JBO.18.7.076017

Figure Lengend Snippet: (a) Conventional view, PSE normal map, and topography estimation in a silicon colon phantom. The surface normal directions and 3-D rendering of a cecum view captures the orientation of slopes and curvature, which are not contained in a conventional ...

Article Snippet: We used a 3-D printed phantom with a 1-mm tall, 0.5-mm radius bump that was created using stereolithography (Quickparts.com).

Techniques:

Journal: International Journal of Bioprinting

Article Title: Discovering new 3D bioprinting applications: Analyzing the case of optical tissue phantoms

doi: 10.18063/IJB.v5i1.178

Figure Lengend Snippet: Methods used for 3D printed optical tissue phantoms

Article Snippet: Ghassemi et al .[ ] “Rapid prototyping of biomimetic vascular phantoms for hyperspectral reflectance imaging” , FDA/United States , The 3D printing of a human retinal vasculature phantom filled with hemoglobin solution was developed. The purpose was applying the phantom in tests of a near-infrared hyperspectral reflectance imaging system for the analysis of the human retina.

Techniques: Tomography

Journal: International Journal of Bioprinting

Article Title: Discovering new 3D bioprinting applications: Analyzing the case of optical tissue phantoms

doi: 10.18063/IJB.v5i1.178

Figure Lengend Snippet: Uses of 3D printed optical tissue phantoms

Article Snippet: Ghassemi et al .[ ] “Rapid prototyping of biomimetic vascular phantoms for hyperspectral reflectance imaging” , FDA/United States , The 3D printing of a human retinal vasculature phantom filled with hemoglobin solution was developed. The purpose was applying the phantom in tests of a near-infrared hyperspectral reflectance imaging system for the analysis of the human retina.

Techniques: Imaging, Fluorescence

Journal: International Journal of Bioprinting

Article Title: Discovering new 3D bioprinting applications: Analyzing the case of optical tissue phantoms

doi: 10.18063/IJB.v5i1.178

Figure Lengend Snippet: Summary of published papers on 3D printed optical tissue phantoms, which are indexed in both Scopus and Web of Science databases, grouped by (A) publication year, (B) affiliation country, (C) institution of principal author, and (D) journal in which the paper is published. In B-D, only the 10 most frequent papers are shown. Note: National Institute of Standards and Technology (NIST), Food and Drug Administration (FDA).

Article Snippet: Ghassemi et al .[ ] “Rapid prototyping of biomimetic vascular phantoms for hyperspectral reflectance imaging” , FDA/United States , The 3D printing of a human retinal vasculature phantom filled with hemoglobin solution was developed. The purpose was applying the phantom in tests of a near-infrared hyperspectral reflectance imaging system for the analysis of the human retina.

Techniques:

Journal: International Journal of Bioprinting

Article Title: Discovering new 3D bioprinting applications: Analyzing the case of optical tissue phantoms

doi: 10.18063/IJB.v5i1.178

Figure Lengend Snippet: Global trends for optical tissue phantoms development using 3D printing

Article Snippet: Ghassemi et al .[ ] “Rapid prototyping of biomimetic vascular phantoms for hyperspectral reflectance imaging” , FDA/United States , The 3D printing of a human retinal vasculature phantom filled with hemoglobin solution was developed. The purpose was applying the phantom in tests of a near-infrared hyperspectral reflectance imaging system for the analysis of the human retina.

Techniques: Generated, Biomarker Discovery, Imaging, Confocal Microscopy, Tomography, Diffusion-based Assay, Fluorescence, Spectroscopy

Journal: International Journal of Bioprinting

Article Title: Discovering new 3D bioprinting applications: Analyzing the case of optical tissue phantoms

doi: 10.18063/IJB.v5i1.178

Figure Lengend Snippet: Materials used for 3D printed optical tissue phantoms

Article Snippet: Ghassemi et al .[ ] “Rapid prototyping of biomimetic vascular phantoms for hyperspectral reflectance imaging” , FDA/United States , The 3D printing of a human retinal vasculature phantom filled with hemoglobin solution was developed. The purpose was applying the phantom in tests of a near-infrared hyperspectral reflectance imaging system for the analysis of the human retina.

Techniques: Titanium Dioxide, Control

Journal: Quantitative Imaging in Medicine and Surgery

Article Title: Radiomics feature reliability assessed by intraclass correlation coefficient: a systematic review

doi: 10.21037/qims-21-86

Figure Lengend Snippet: Summary of phantom and animal studies

Article Snippet: Pfaehler et al ., 2020 ( 139 ) , 3D printed phantom inserts in NEMA NU 2-2012 IQ phantom , Acquisition, quantification , Test-retest (statistically equal replicates) (FBN) , 90.70% , , 0.9.

Techniques: Imaging, Sequencing